Establishing a connection via USB in the local network
Web browser displays warning
After the access address of the product has been entered, a message might appear indicating that the connection to the user interface of the product is not secure.
- Continue loading the user interface (scroll to bottom and click proceed/advance).
Requirements:
The product must be commissioned.
The cover of the product is open.
A smart terminal device (e.g. laptop) must be available.
The respective latest version of one of the following web browsers must be installed on the smart terminal device: Chrome, Edge, Firefox or Safari.
USB cable Micro USB to USB type A must be present.
Java Runtime Environment (JRE) ≥ version 13 is installed on the PC.
Procedure:
- Connect the USB cable at the CONIFG terminal with your smart terminal device (e.g. laptop).
- The RNDIS network (remote network driver interface specification) is emulated (Linux and MAC operating system automatically detect this virtual network).
- For Windows operating systems, the RNDIS/CDC Ethernet-Gadget driver for the RNDIS network adapter must be installed on the smart terminal device (e.g. laptop). Normally, this happens automatically. At the same time, a corresponding field appears at the bottom left of the desktop. It displays the installation progress and confirms its completion.
- After the driver has been successfully installed, the system recognizes the charging station as a network adapter.
- Open the web browser of your smart terminal device and enter [http://192.168.123.123/operator] in the address bar.
- The login page of the user interface opens if the product has already been configured.
- Input the login data of the default setting into the login field to log in. SMA Solar Technology AG strongly recommends changing the password to a secure password during the first session Changing the Password.
- Then you can change the network configuration on the user interface of the product.
Login data of default setting:
User: operator
Password: service.kraft