Ending the Charging Process
The charging process can only be ended with the same RFID card that it was started with.
In case of grid failure, the mechanical lock on the charging cable at the charging station (SMA EV Charger Business with charging socket) automatically opens.
Alternatively, the charging process can also be ended at the vehicle (see the manufacturer’s manual).
Procedure:
- To end the charging process, hold the RFID card in front of the RFID card reader.
- The charging process is stopped and the charging cable lock is opened.
- The LED indicator is slowly flashing green.
- Unlock and disconnect the charging cable at the vehicle.
- Depending on the product design, remove the charging cable from the charging station.
Information for EVCB-3AC-10 / EVCB-3AC-ECC-10: After the charging process has been completed, hang the charging cables in the designated connector location on the product. This will ensure that no water can penetrate the connectors.
