Setting the network via Ethernet

The settings of the network address must be coordinated with the responsible IT administration.

Requirements:

  • The user interface must be open and you must be logged in.

Procedure:

  1. In the navigation area, select [Network].
  2. Under [LAN] > Mode for Ethernet configuration, different modes can be selected.
  3. Make sure that all charging stations share the same network and have the same firmware version.
  4. Make sure that each charging station has its own IP address. An IP address must not be assigned more than once.
  5. Click on [Save] to save the changes and [Restart].
    Setting Network
    Setting the Network Via Cellular Phone