Setting up the backend via Ethernet
Each charging point is connected to a router via LAN/Ethernet and through it, to the backend.
Requirements:
The charging point is connected to the local network.
The network is configured ( > Setting the network via Ethernet).
The user interface must be open and you must be logged in.
Procedure:
- In the navigation area, select [Backend].
- Under [Connection] > Connection type select [Ethernet].
- Under [OCPP] > OCPP ChargeBoxIdentity (ChargePointID), check the ChargePointID (DE*342*EXXXXXXXX).
- Under [OCPP mode] select the value [OCPP-J 1.6].
- Under WebSockets JSON OCPP URL of the backend enter the value [ws://ocpp.e-flux.nl/1.6/sma].
- Click on [Save] to save the changes and [Restart].
- In the dashboard overview, the connection status to the backend is displayed.
- You can sign up as a new user in the SMA eMobility Portal and manage the charging station ( > Register as a new user in the eMobility Portal).
- If you already have an account in the SMA eMobility Portal, log in to the eMobility Portal to manage the charging station ( > Log in to eMobility Portal as an existing user).