Configuring the fast stop for the external grid and PV system protection function

After selecting a function and completing the appropriate electrical connection, you must activate the parameters for grid and PV system protection and, if required, configure additional settings.

The setting can be activated in the installation assistant under the step Grid management services > Enable grid and PV system protection via I/O modules.

Procedure:

  1. Follow the procedure for changing the parameters.
  2. In the parameter group Device > Power control module, select the parameter Grid and system protection and set it to On.
  3. Select [Save all] to save the changes.

    Also see:

    Setting the fast-stop function with external switch
    Setting SMA ShadeFix