Setting the fast-stop function with external switch

After selecting a function and completing the necessary electrical connection, you must activate the fast-stop parameters and, if required, configure additional settings.

The setting can be activated in the installation assistant under the step Grid management services > Enable fast-stop function.

Procedure:

  1. Follow the procedure for changing the parameters.
  2. In the parameter group Device > Inputs/outputs > Digital input, select the parameter Fast shutdown via the digital input and set it to Yes.
  3. Select [Save all] to save the changes.

    Also see:

    Changing the Operating Mode of the Multifunction Relay
    Configuring the fast stop for the external grid and PV system protection function