Operating Modes of the Multifunction Relay
You can use the following parameters to set the operating mode of the multifunction relay.
Name | Group | Settings |
|---|---|---|
Operating mode of multifunction relay | Device>Multifunction relay |
|
The setting values for the operating mode of the multifunction relay are to be understood as follows:
Settings | Description |
|---|---|
Fan control | The multifunction relay controls an external fan, depending on the temperature of the inverter. |
Switching status grid relay | The local grid operator may require that a signal is transmitted as soon as the inverter connects to the utility grid. The multifunction relay can be used to trigger this signal. |
Control via communication | The multifunction relay switches loads on or off according to commands transmitted by a communication product. |
Fault indication | The multifunction relay controls a display device (e.g. a warning light) which, depending on the type of connection, signals either an error or the undisturbed operation of the inverter. |
Also see: