Removing the Fan Assembly
Qualified person
- Disconnect the inverter from voltage sources and secure it against being switched on again Disconnecting the Inverter from Voltage Sources.
- Wait 30 minutes for the enclosure to cool down.
- Loosen the spring-loaded cross-head screw (M4).
- Remove the sealing plate of the fan cassette.
- To release the cable connection, press the clamping bracket together to unlock and pull the cable connection apart.
- Loosen the 2 cross-head screws (M4) on the fan cassette.
- Pull the fan cassette out of the inverter.
- Clean Cleaning or replace the fan cassette if necessary.
CAUTION
Risk of burns due to hot enclosure parts
