Opening the Cable Compartment
Qualified person
For some of the actions described in this document, the cable compartment must be opened.
Procedure:
- Disconnect the inverter from voltage sources and secure it against being switched on again ( > Disconnecting the Inverter from Voltage Sources).
- Loosen the two screws (M6x20) on the cable compartment cover using the enclosed internal Allen key and open the cable compartment.
- Lift the limiting lever on the inside of the cover on the right and remove from the thread.
- Engage the end of the limiting lever in the cable compartment with the thread.
- The cable compartment cover has been secured and remains open.
Also see: