Registering in Sunny Portal


Once you have carried out the commissioning on the user interface of the product, you can make further system configurations in Sunny Portal. For this, all products of a system must be registered in Sunny Portal.

Profiles for data communication

Different profiles are available to control the intensity of data communication in the system. The profiles can be edited in the system properties at any time in Sunny Portal to adjust the intensity. Note that when switching from a low to a high intensity data communication, the data from the past is not retroactively adjusted. The adjustment applies from the date of the change. The following profile can be selected for data communication:

  1. High (default setting): Devices send all relevant data to the Sunny Portal every 5 minutes.
  2. Medium: Devices send all relevant data to the Sunny Portal every 15 minutes.
  3. Low: Devices send the most important data to the Sunny Portal 6 times per day.

Requirements:

  • The product must be in operation and connected to the local network via an Internet router.

  • The registration ID (RID), identification key (PIC) and the Internet address of the type label or of other provided labels must be available.

  • The system LED must glow green.

  • An active Internet connection must be established.

Procedure:

  1. Call up the Internet address https://ennexOS.SunnyPortal.com in the web browser.
  2. Register as a new user in Sunny Portal or log into Sunny Portal as an existing user.
  3. Create a new system or add product to an existing system.

Register as a new user in Sunny Portal.

  1. Call up the Internet address https://ennexOS.SunnyPortal.com in the web browser.
  2. Select I require a user account.
  3. Enter the necessary data for registration.
  4. Select [Register].
  5. After a few minutes you will receive an e-mail containing a confirmation link for registration in Sunny Portal.
  6. If you have not received an e-mail from Sunny Portal, check whether the e-mail has been redirected to a folder for junk mail or whether an incorrect e-mail address has been entered.
  7. Follow the confirmation link in the e-mail within 48 hours.
  8. Sunny Portal opens a separate window to confirm successful registration.
  9. Call up the Internet address https://ennexOS.SunnyPortal.com in the web browser.
  10. Enter the e-mail address and the Sunny Portal password in the fields User and Password.
  11. Select [Login].

Log in to Sunny Portal as an existing user.

Requirement:

  • You must have access to a user account in Sunny Portal, Sunny Places or Sunny Design.

Procedure:

  1. Call up the Internet address https://ennexOS.SunnyPortal.com in the web browser.
  2. Enter the e-mail address and the Sunny Portal password in the fields User and Password.
  3. Select [Login].

Create new PV system

The system setup assistant is a step-by-step guide to the processes required for the registration of your system in Sunny Portal.

Service access

To ensure a better quality of service, activate the switch for service access during registration.

Procedure:

  1. Log into Sunny Portal.
  2. Select the menu Configuration.
  3. Select [Create system] in the context menu.
  4. The system setup assistant opens.

Add product to an existing system

Procedure:

  1. Log into Sunny Portal.
  2. Select system.
  3. Select the menu Configuration.
  4. Select [Device management] in the context menu.
  5. Select the button.
  6. The system setup assistant opens.