Mounting the product


There are two options for mounting the product:

  • Mounting on the top-hat rail

  • Mounting on a wall

Mounting the Product on the DIN rail

Additionally required mounting material (not included in the scope of delivery):

  • Top-hat rail (TH 35-7.5)

Requirement:

  • The top-hat rail must be securely mounted.

Procedure:

    3164385420
  1. Place the product onto the DIN rail from above and hook it into place.
  2. The product snaps audibly into place.
  3. Ensure that the product is securely in place.

Mounting the Product on the Wall

    3164385804
  1. Press the four brackets on the back side of the Product out from the inside.
  2. The brackets snap into place.
  3. Mark the drill holes using the brackets as a template.
  4. Drill the holes and insert the provided screw anchors. Do not drill through the brackets.
  5. 3164572428
  6. Insert the provided screws through the brackets and tighten. Do not damage the brackets.
  7. Ensure that the product is securely in place.