Requirements for Mounting


Requirements for the mounting location:

WARNING

Danger to life due to fire or explosion

Despite careful construction, electrical devices can cause fires. This can result in death or serious injury.

  1. Do not mount the product in areas containing highly flammable materials or gases.
  2. Do not mount the product in potentially explosive atmospheres.

CAUTION

Damage due to electromagnetic radiation

This product emits electromagnetic radiation during operation, which may interfere with the operation of other devices and active body aids (e.g. pacemakers).

  1. Persons must not remain closer than 20 cm (8 in) to the product for long periods of time.
  • A solid, flat support surface must be available for mounting.

  • The mounting location must be inaccessible to children.

  • The mounting location must be suitable for the weight and dimensions of the product Technical Data).

  • The mounting location should be freely and safely accessible at all times without the need for any auxiliary equipment (such as scaffolding or lifting platforms). Non-fulfillment of these criteria may restrict servicing.

  • All ambient conditions must be met Technical Data).

  • The labelling on the product must be readable after installation.

Permitted and prohibited mounting positions:

  • The product may only be mounted in a horizontal position.

Dimensions for mounting:

6596519948

Dimensions for wall mounting (Dimensions in mm (in))

Recommended clearances:

  • A clearance of 50 mm (2 in) must be observed above and below to other objects.