Installing the cable protection for the outdoor version of the battery cabinet
A cable protection system is included in the scope of delivery of the outdoor version of the battery cabinet. This is used to route the connection and communication cables safely and securely and must be attached to the battery cabinet in accordance with the following installation steps.
Procedure:
- Remove the cable protection cover by loosening the 6 combination hexagon head screws.
- Attach the cable protection enclosure to the battery cabinet below the inverter using the 6 combination hexagon head screws (M6x16, tightening torque: 2.5 Nm).
- Route the DC lines and communication cable into the cable protection system from below and secure them.
- Attach the cable protection cover using the 6 combination hexagon head screws (M6x16, tightening torque: 2.5 Nm).
- Route the AC line from the inverter to the point of interconnection and attach to the cable strain-relief eyelets on the cable protection cover.
