Control Elements
Control element | Description |
|---|---|
User interface of the inverter | The user interface of the inverter is used to configure and monitor the system, but primarily the inverter and battery. If there are multiple inverters installed, one inverter can be configured as the System Manager. The user interface of the System Manager is used to configure and monitor all inverters and batteries in the system. |
Optional: User interface of the SMA Data Manager M | If an SMA Data Manager M installed, the SMA Data Manager M is configured as the System Manager. The user interface of the System Manager is used to configure and monitor all inverters and batteries in the system. |
LED indicators on the inverter | The LEDs indicate the operating state of the inverter. |
LED displays on the control panel and on the battery high-voltage box | The LEDs indicate the operating state of the battery. |
Display on the battery control panel | The display is used to make some default settings during commissioning of the battery. The display also shows the event messages for the battery. |
On/Off button on the battery control panel | The On/Off button is used during commissioning and when enabling the battery. |
Emergency switch on the battery control panel | The emergency switch is used in emergency situations to quickly switch off the battery. |
Battery cabinet DC circuit breaker | The DC circuit breaker is used during commissioning and when enabling the battery. The position depends on the version:
|
QF, QF1 and QF2 circuit breakers on the high-voltage box | The circuit breakers are used during commissioning and when disconnecting the battery. |
Outdoor version: Switch on the circuit breakers on the inside left on the enclosure (AC Main Breaker, SPD2 Breaker, Air Condition Power, Gas Fan Power) | The circuit breakers are used during commissioning and when disconnecting the battery. |
Also see: