Operating modes for battery backup
You can adjust the battery-backup system using the following parameters.
Name | Group | Settings | Description |
|---|---|---|---|
Backup mode operating mode | Device > Operation | Off | The function for battery backup is not used. |
Automatic | The battery-backup operation will be automatically activated in the event of a power outage. | ||
Manual Control | Usable from firmware version 3.05.26.R and if an optional transfer switch is present in the system. Setting this parameter reduces losses caused by the internal contactor. With this setting, keep in mind that the switch must be manually reset when the utility grid is active again ( > Circuitry overview with battery-backup system and optional transfer switch). |
Also see: