Switching WLAN On

If you have switched the WLAN function for direct connection or for connection in the local network off, you can switch the WLAN function back on in accordance with the following procedure.

Requirements:

  • If the WLAN function was previously switched off completely, the inverter must be connected to a computer or router via Ethernet.

Procedure:

  1. To switch on the WLAN direct connection, in the parameter group PV system communication > WLAN, select the parameter Soft-access-point is turned on and set this to Yes.
  2. To switch on the Wi-Fi connection in the local network, in the parameter group PV system communication > Wi-Fi, select the parameter Wi-Fi is turned on and set this to Yes.
    Switching WLAN Off
    Password