Mounting the battery modules with base
Qualified person
Additionally required mounting material (not included in the scope of delivery):
2 to 4 screws per base suitable for the support surface and the weight of the product
2 to 4 washers per base suitable for use with the screws
Where necessary, 2 to 4 screw anchors per base suitable for the support surface and the screws
Procedure:
- Place the base against the wall and align the fixing bracket evenly with the wall.
- Attach fixing bracket with 2 supplied screw and washer assemblies to the base (TX20; torque 2.5 Nm).
- Mark the position of the drill holes using the fixing bracket.
- Drill holes and insert the screw anchors if necessary.
- Align the base horizontally on the wall and screw to the wall using 2 screws and washers.
- Place the battery module on the base. Ensure that the battery module is securely in place.
- Attach battery module on the left and right to the base using supplied screw and washer assembly each (TX20; torque 2.5 Nm).
Further procedure for 2 to 3 battery modules directly above one another:
- Attach the second-to-last battery module (viewed from the top) to the wall using the fixing bracket (TX20; tightening torque 2.5 Nm).
When there are 2 battery modules, this step is done now.
When there are 3 battery modules, this step is done after attaching the second battery module. - Place the second battery module on the first battery module. Fasten the battery module on the left and right to the previous battery module using a supplied screw and washer assembly each (TX20; torque 2.5 Nm). Ensure that the battery module is securely in place.
- For 3 battery modules: now insert the fixing bracket; see above. Repeat the previous step for the third battery module.
