Mount the battery modules with wall mounting bracket

Qualified person

Additionally required mounting material (not included in the scope of delivery):

  • 3 screws per battery module suitable for the support surface and weight of the battery module

  • 3 washers per battery module suitable for the screws

  • Where necessary, 3 screw anchors per battery module suitable for the support surface and the screws

Procedure:

  1. Mark the position of the drill holes using the wall mounting bracket.
  2. Drill the holes and insert the screw anchors.
    3. 12124532492
  3. Secure the wall mounting bracket horizontally on the wall using screws and washers.
    4. 12997416972
  4. For battery modules directly above one another: screw the connecting element with 2 supplied screw and washer assemblies to the wall mounting bracket (TX20; torque 2.5 Nm).
    5. 12997417356
  5. For battery modules directly above one another: align another wall mounting bracket on the connecting element and screw down with a supplied screw and washer assembly (TX20; torque 2.5 Nm).
  6. For battery modules directly above one another: fasten another wall mounting bracket to the wall using screws and washers.
  7. For additional battery modules directly above one another: repeat the above three steps for each battery module.
    8. 12997417740
  8. Slightly screw in a supplied screw and washer assembly on the wall mounting bracket at the bottom, leaving space for the mounting bracket of the battery module (TX20).
    9. 12997418124
  9. Hook the lower battery module in the wall mounting bracket and secure below with the screw and washer assembly provided (TX20; torque 2.5 Nm). To do this, the 2 bolts on the right and left between the ribs on the back of the battery module must be hooked into the keyways of the wall mounting bracket. Ensure that the battery module is securely in place.
    10. 12997418508
  10. For battery modules directly above one another: mount another battery module above the previous battery module.
    11. 12997418892
  11. For battery modules directly above one another: fasten battery module on the left and right to the previous battery module using a supplied screw and washer assembly (TX20; torque 2.5 Nm). Ensure that the battery module is securely in place.
  12. For battery modules stacked directly on top of each other: Repeat the above two steps for each additional battery module.
    Dimensions for wall mounting
    Mounting with base