Checking the configuration of the battery modules on the user interface of the inverter

Qualified person

The user interface available and its functions depend on the inverter. Refer to the inverter manual for detailed information.

Procedure:

  1. Activate the user interface of the inverter.
  2. Log in as Installer.
  3. Depending on the inverter, call up Installation assistant or Configuration wizard.
  4. Follow the instructions of the user interface up to Battery configuration.
  5. Check whether the Current capacity shown in the inverter user interface matches the usable energy capacity indicated in this manual.
  6. If the two specifications regarding battery capacity do not match, disconnect the inverter from voltage sources, ensure that all battery cables are property connected and recommission the inverter.
  7. If the two specifications regarding battery capacity still do not match, contact Service.

    Also see:

    Commissioning the battery modules
    Disconnecting the battery modules from voltage sources