Activate WPS Function

The inverter only has a WPS function if a Wi-Fi interface is available. The inverter deactivates the WPS function automatically. When this happens, a signal sounds: long signal (one second) > break (1 second) > very long signal (3 seconds).

Procedure:

  1. Enable the WPS function on the inverter. To do this, tap twice on the enclosure lid of the Connection Unit.
  2. The blue LED flashes quickly for about two minutes. The WPS function is active during this time.
    Setting Time-Controlled Inverter Operation in Off-Grid Systems
    Switching WLAN On and Off