Setting the Functions of the Multifunction Relays
Qualified person
The multifunction relays of the master are preset in a single-cluster system for increased self-consumption and cannot be changed. In multicluster systems with Multicluster-Box 12 (MC-BOX-12.3-20), multifunction relays 1 and 2 in the master of the main cluster and multifunction relay 1 in slave 1 of the main cluster are set permanently. Furthermore, free multifunctional relays can be used for additional functions.
Note the function of the multifunction relays in the following table during the electrical connection ( > Connecting the Components).
Table for configuring the operating modes of the multifunction relay (for your own notes):
Parameter | Multifunction relay | Value | Function/output |
|---|---|---|---|
Operating mode of the multifunction relay | Relay 1 of Sunny Island inverter/master | ||
Relay 2 of Sunny Island inverter/master | |||
Slave 1: Operating mode of multifunction relay | Relay 1 of Slave 1 | ||
Relay 2 of Slave 1 | |||
Slave 2: Operating mode of multifunction relay | Relay 1 of Slave 2 | ||
Relay 2 of Slave 2 |
Procedure:
The basic procedure for changing operating parameters is explained in another section ( > Changing Operating Parameters).
- Select the display group Device > Multifunction relay > Operating mode.
- Set the parameter for the multifunction relay functions as shown in the table above.