Country standard
The product is not set to any country data set at the factory. While commissioning the product using the commissioning wizard, a country data set appropriate for the installation site and intended purpose must be selected for the product to start operating.
You can change the country standard via the user interface. First select the country data set and then the grid type suitable for your application.
The country data set must be set correctly.
If you select a country data set which is not valid for your country and purpose, it can cause a disturbance in the PV system and lead to problems with the grid operator. When selecting the country data set, you must always observe the locally applicable standards and directives as well as the properties of the PV system (e.g. PV system size, grid-connection point).
- If you are not sure which standards and directives are valid for your country or purpose, contact the grid operator.
The grid type must be set correctly
If you select the wrong grid type, it can cause a disturbance in the PV system and lead to problems with the grid operator.
Channel | Name | Settings |
|---|---|---|
CntrySet | Set country standard | Selection of different country data sets |
Inverter.GriTyp | Grid type | Selection of different grid types |
Cntry | Country standard | Display of the currently set country data set |
CntryBas | Underlying country standard | Display of the country data set on which the current settings are based |
GridMs.GriTyp | Grid type | Display of the currently set grid type |