Deactivating the energy management

Qualified person

A single energy management profile cannot be deactivated, only changed. To deactivate the entire energy management, proceed as described in this section.

Requirements:

  • The user interface must be open and you must be logged in.

Procedure:

  1. Select the menu item Energy management in the menu Configuration.
  2. Select Advanced settings.
  3. Select No control by SMA energy management.
  4. Finish by clicking [Save].
  • Energy management is deactivated. If there is a battery in the system, the respective battery or hybrid inverter must take over control itself. Otherwise, the battery will behave according to its fallback behavior Set battery fallback behavior when energy management is disabled.

    Also see:

    Activating the energy management
    Predefined operating modes