Scope of Delivery
Check the scope of delivery for completeness and any externally visible damage. Contact your distributor if the scope of delivery is incomplete or damaged.
Sunny Boy
Components included in the scope of delivery of the inverter
|
Position |
Quantity |
Designation |
|---|---|---|
|
A |
1 |
Inverter |
|
B |
1 |
Supplementary sheet for the inverter, Production Test Report |
|
C |
1 |
Grounding bolt |
|
D |
1 |
Clamping bracket for equipment grounding |
|
E |
1 |
Washer for equipment grounding |
|
F |
2 |
Hexagon nut for equipment grounding |
Sunny Multigate-US
Elements included in the scope of delivery of the Sunny Multigate
|
Position |
Quantity |
Designation |
|---|---|---|
|
A |
1 |
Sunny Multigate |
|
B |
1 |
AC field plug: insulator, enclosure, seal, screw connection |
|
C |
1 |
Protective cap for the unused AC pin connector on the last inverter* |
|
D |
1 |
Warning labels for attaching to the industrial enclosure |
|
E |
1 |
Label with registration ID (RID) and identification key (PIC) for registration in Sunny Portal** |
|
F |
1 |
Installation manual for Sunny Boy and Sunny Multigate, mounting overview |
* Last inverter: in this document, the inverter that is located at the end of the PV system and not directly connected to the Sunny Multigate but only to one other inverter, is referred to as the "last inverter". An AC pin connector remains unused on the last inverter and must be closed with a protective cap.
** Keep this label with your access data for registration in Sunny Portal. The access data can also be found on the Sunny Multigate type label.
AC Cable and DC Plug
Components included in the scope of delivery of the AC cable and the DC plug
|
Position |
Quantity |
Designation |
|---|---|---|
|
A |
1 |
AC cable with two connectors for connecting two inverters or for connecting the first inverter to the AC field plug* |
|
B |
1 |
DC plug with two DC connectors** |
* First inverter: The inverter that is located at the beginning of the PV system and is directly connected to the Sunny Multigate via the AC cable is called "first inverter" in this document. AC cables are plugged into both AC pin connectors at the first inverter.
** The DC connectors illustrated may deviate from your order.