Sunny Multigate

The Sunny Multigate is a communication unit and forms the electrical connection point of the PV system with a maximum of twelve micro inverters to the utility grid. The Sunny Multigate is connected between the micro inverters and the utility grid to feed the alternating current of the micro inverters collectively into the utility grid.

839098892

Design of the Sunny Multigate

Position

Explanation

A

Press-out brackets for mounting with screws

B

Screw terminal for AC input (inverter)

Labeling: Inverter

C

LEDs

The upper LED indicates the operating state of the inverters. The lower LED indicates the operating state of the Sunny Multigate. Depending on the operating state, the LEDs are glowing green, red or orange, or are off ( > LED Signals).

D

Interface for optional communication

E

The type label provides a clear identification of the Sunny Multigate. You will require the information on the type label to use the product safely and when seeking customer support from the SMA Service Line. You will find the following information on the type label:

  • Device type (Model)

  • Serial number (Serial No.)

  • Registration ID (RID) for registration in Sunny Portal

  • Identification key (PIC) for registration in Sunny Portal

  • Device-specific characteristics

F

Screw terminal for AC output (utility grid)

Labeling: Grid

G

Pin connector for connecting the network cable (RJ45)

    <  Sunny Boy
    >  LED Signals