Grounding the Metal Industrial Enclosure

If you use an industrial enclosure made of metal, you must ground the industrial enclosure in accordance with the National Electrical Code® and the following procedure.

Additionally required material (not included in the scope of delivery):

  • Connecting terminal plate for grounding the industrial enclosure, its door and the Sunny Multigate
  • Cable type: copper with conductor cross-section of at least 2.5 mm² (14°AWG)
  • Cable type: aluminum made of copper-coated wire with conductor cross-section of at least 4 mm² (12 AWG)

  • Connect the grounding of the industrial enclosure to the grounding of the Sunny Multigate and the door of the industrial enclosure. Use the connecting terminal plate for grounding.

    <  Connecting the Sunny Multigate to the Utility Grid
    >  Connecting the PV Modules to the Inverters