Symbols on the Product
Symbol | Explanation |
|---|---|
| Beware of a danger zone This symbol indicates that the product must be additionally grounded if additional grounding or equipotential bonding is required at the installation site. |
Beware of electrical voltage The product operates at high voltages. | |
| Beware of hot surface The product can get hot during operation. |
| Danger to life due to high voltages in the inverter; observe a waiting time of 10 minutes. High voltages that can cause lethal electric shocks are present in the live components of the inverter. Prior to performing any work on the inverter, disconnect it from all voltage sources as described in this document. |
| Observe the documentations Observe all documentations supplied with the product. |
| Inverter Together with the green LED, this symbol indicates the operating state of the inverter. |
| Observe the documentation Together with the red LED, this symbol indicates an error. |
| Data transmission Together with the blue LED, this symbol indicates the status of the network connection. |
| Three-phase alternating current with neutral conductor |
| Direct current |
| The product has no galvanic isolation. |
| WEEE designation Do not dispose of the product together with the household waste but in accordance with the disposal regulations for electronic waste applicable at the installation site. |
| The product is suitable for outdoor installation. |
|
|
Degree of protection IP65 The product is protected against the penetration of dust and water that is directed as a jet against the enclosure from all directions. |
| CE marking The product complies with the requirements of the applicable EU directives. |
| UKCA marking The product complies with the regulations of the applicable laws of England, Wales and Scotland. |
| RoHS labeling The product complies with the requirements of the applicable EU directives. |
|
|
RCM (Regulatory Compliance Mark) The product complies with the requirements of the applicable Australian standards. |
|
|
The product complies with the Moroccan safety and EMC requirements for electronic products. |
