Establishing a direct connection via WLAN


You have several options to connect the product to a smart device. The procedure can be different depending on the devices. If the procedures described do not apply to your device, establish the direct connection via Wi-Fi as described in the manual of your device.

The following connection options ar available:

  • Connection to SMA 360° App

  • Connection with Wi-Fi network search

Requirements:

  • The product must be commissioned.

  • A smart device (e.g. smartphone, tablet or laptop) must be available.

  • The respective latest version of one of the following web browsers must be installed on the smart device: Chrome, Edge, Firefox or Safari.

  • JavaScript must be enabled in the web browser of the smart device.

SSID, IP address and WLAN password

  1. SSID in WiFi: https://SMA[serial number] (e.g. https://SMA0123456789)
  2. Device-specific WLAN password: see WPA2-PSK on the type label of the product or the rear side of the manual included in delivery
  3. Standard access address for a direct connection via WLAN outside of a local network: https://smalogin.net or 192.168.12.3

Connection to SMA 360° App

Requirements:

  • A smart device with camera (e.g. smartphone or tablet) must be available.

  • The SMA 360° App must be installed on the smart device.

  • An user account for Sunny Portal must already exist.

Procedure:

  1. Open the SMA 360° App and login with the Sunny Portal account details.
  2. Select QR-Code Scan in the menu.
  3. Scan the QR Code on you product via the SMA 360° App.
  4. The smart device automatically connects to the product. The web browser of your smart device opens and the login page of the user interface is displayed.
  5. If the web browser of the smart end device does not open automatically and the login page of the user interface is not displayed, open the web browser and enter https://smalogin.net in the address bar.