Performing the Firmware Update via SMA 360° App
Qualified person
A firmware update can be carried out for the Sunny Boy Smart Energy via the SMA 360° app. This is possible before configuration or during operation.
Functional limitations during the update
While an update is being performed, the functions of the product may be limited. The product is performing a restart and may be without function at times. This process takes several minutes and cannot be canceled.
Requirements:
The inverter must be switched on ( > Switching the Inverter On).
The SMA 360° app must be installed and open on your end device.
Procedure:
- Select Setup > Manual update.
- To download the firmware to the end device, scroll down the displayed page and select Download firmware for SBSE.
Tip: If you then want to update other Sunny Boy Smart Energy devices, you can skip this step as the file is already on your end device. - The firmware file is stored on your end device.
- Select [Activate scanner] and scan the QR code on the cover of the inverter.
- Log in with the access data for the inverter or create an administrator account.
- The current firmware version of the inverter is displayed.
- Click on [Select file] and select firmware file on your end device.
- The new firmware version is shown.
- Select [Execute update] to start update.
Also see: