Network cable requirements

The cable length and quality affect the quality of the signal. Observe the following cable requirements:

• Cable type: 100BaseTx

• Cable category: minimum CAT5e

• Plug type: RJ45 of Cat5e or higher

• Shielding: SF/UTP, S/UTP, SF/FTP or S/FTP

• Number of insulated conductor pairs and insulated conductor cross-section: at least 2 x 2 x 0.22 mm² (2 x 2 x 24 AWG)

• Maximum cable length within the inverter: 260 mm (10.3 in)

• Maximum cable length between two nodes when using patch cables: 50 m (164 ft)

• Maximum cable length between two nodes when using installation cables: 100 m (328 ft)

• UV-resistant if installed outdoors.

Also see:

• Connecting the Network Cable for Local Network and Energy Meter