Disassembling the Inverter
CAUTION
Risk of injury due to weight of product
Injuries may result if the product is lifted incorrectly or dropped while being transported or mounted.
- Transport and lift the product carefully. Take the weight of the product into account.
- Wear suitable personal protective equipment for all work on the product.
Requirements:
The terminals must be disconnected from the inverter ( > Disconnecting the Terminals from the Inverter).
Procedure:
- Remove the side covers. To do so, release the side covers at the bottom of the inverter and slide them upward slightly to disengage from the hooks on the mounting bracket and the inverter.
- Lift the inverter by the top and bottom of the enclosure, then unhook it from the mounting bracket.
- Remove the mounting bracket from the wall.
- If the inverter is to be stored or shipped in packaging, pack the inverter and mounting bracket. Use the original packaging or packaging that is suitable for the weight and dimensions of the inverter.
Also see: