Arc-Fault Circuit Interrupter (AFCI)
Qualified person
You can set the arc-fault circuit interrupter using the following parameters.
Channel | Name | Settings |
|---|---|---|
AfciIsOn | AFCI switched on | Yes No |
You can use the following parameters to set the manual restart after an arc fault detection.
Channel | Name | Settings |
|---|---|---|
Operation.ManRstr.IsOn | Manual restart activated | Yes No |
Operation.ManRstr.ManRstrAFCI | Manual restart after arc detection | On Off Yes, after 5 electric arc detections within 24 hrs |
Also see: