Establishing a direct Wi-Fi connection by entering the Wi-Fi data

Requirements:

  • A smart terminal (e.g. laptop) must be available.

Procedure:

  1. Activate the Wi-Fi access point on the product. Tap on the enclosure lid of the product twice.
  2. The COM LED is intermittently flashing orange and green for approx. 5 seconds. The Wi-Fi access point is then activated for approx. 30 minutes. Once this period has expired, the Wi-Fi access point is deactivated automatically.
  3. Search for Wi-Fi networks with your smart device.
  4. Select the SSID of the product SMA[serial number] in the list with the detected Wi-Fi networks.
  5. Enter the device-specific Wi-Fi password (see WPA2-PSK on the type label).
  6. Open the web browser of your smart terminal and enter the IP address https://192.168.12.3 into the address bar or, if your smart terminal supports MSDNs services, SMA[serialnumber].local or https://SMA[serialnumber].
  7. When you connect to the user interface for the first time, the welcome page opens. The Commissioning Assistant for configuring the product can be started via the welcome page.
  8. The login page of the user interface opens if the product has already been configured.
    Access information for direct Wi-Fi connection
    Establishing a direct Wi-Fi connection by scanning the QR code