Connecting network cable to X16

Qualified person

Interference in data transmission due to unshielded power cables

If unshielded power cables are used, they generate an electromagnetic field during operation which may induce interference in network cables during data transmission.

  1. When laying network cables without separating strip, observe a minimum clearance of 200 mm (8 in) to unshielded energy cables.
  2. When laying network cables with separating aluminum strip, observe a minimum clearance of 100 mm (4 in) to unshielded energy cables.
  3. When laying network cables with separating steel strip, observe a minimum clearance of 50 mm (2 in) to unshielded energy cables.

Additionally required material (not included in the scope of delivery):

  • 1 network cable

Requirements:

  • An Internet router with active Internet connection must be available.

Procedure:

  1. Plug the RJ45 connector of the network cable into the network port X16 until the RJ45 connector snaps into place.
  2. Connect the other end of the network cable to a an Internet router.
    Internet X16
    Connection to the voltage supply X1