Establishing a direct Wi-Fi connection by scanning the QR code

Requirements:

  • A smart terminal (e.g. laptop) must be available.

Procedure:

  1. Activate the Wi-Fi access point on the product. Tap on the enclosure lid of the product twice.
  2. The COM LED is intermittently flashing orange and green for approx. 5 seconds. The Wi-Fi access point is then activated for approx. 30 minutes. Once this period has expired, the Wi-Fi access point is deactivated automatically.
  3. Scan the QR code on the device label using your terminal.
  4. Confirm the connection to the Wi-Fi access point of the product on your terminal. It may be necessary to deactivate the mobile data connection on your smart terminal.
  5. Open the web browser of your smart terminal and enter the IP address https://192.168.12.3 into the address bar or, if your smart terminal supports MSDNs services, SMA[serialnumber].local or https://SMA[serialnumber]. Or, to open the user interface directly, scan the right QR code on the label included in the delivery using your smart terminal.
  6. When you connect to the user interface for the first time, the welcome page opens. The Commissioning Assistant for configuring the product can be started via the welcome page.
  7. The login page of the user interface opens if the product has already been configured.
    Establishing a direct Wi-Fi connection by entering the Wi-Fi data
    Registration in Sunny Portal