Network cable requirements X14 to X16

The cable length and quality affect the quality of the signal. Observe the following cable requirements:

• Cable type: 100BaseTx

• Cable category: minimum CAT5e

• Plug type: RJ45 of Cat5, Cat5e, Cat6 or Cat6a (Cat7 plugs cannot be used)

• Shielding: S/UTP, F/UTP or higher

• Number of insulated conductor pairs and insulated conductor cross-section: at least 2 x 2 x 0.22 mm² (2 x 2 x 24 AWG)

• Maximum cable length between two nodes when using patch cables: < 50 m (164 ft)

• Maximum cable length between two nodes when using installation cables: < 100 m (328 ft)

• UV-resistant for outdoor use