LED Signals
The LEDs indicate the operating state and communication status of the product. Not relevant operating states are shown as "-".
System LED
| COM LED
| Explanation |
|---|---|---|
Startup process | ||
Off | Off | No power supply or no boot up procedure. |
Glowing orange | Glowing orange | Boot up procedure started. |
Flashing green | - | User interface is being loaded. |
Glowing green | Glowing orange | Communication is being started. |
Glowing red | Off | Boot up procedure running. |
Glowing red (for longer than 2 minutes) | Off | Errors during the booting procedure. |
Glowing green | - | Normal operation |
Flashing red | - | System error |
Flashing orange | - | Update procedure running. |
Communication status | ||
- | Flashing orange and green in alternation | WLAN access point is activated. |
- | Flashing green | Connection to all devices connected via LAN is established. |
- | Glowing orange | Connection to at least 1 device connected via LAN is disrupted. |
- | Glowing red | Connection to all devices connected via LAN is disrupted. |
Function button | ||
Flashing orange and green in alternation | Off | Function button has been pressed for less than 5 seconds. |
Flashing orange and green in alternation | Glowing green | Function button has been pressed for between 5 and 10 seconds. |
Flashing orange and green in alternation | Glowing orange | Function button has been pressed for between 10 and 15 seconds. |
Flashing orange and green in alternation | Glowing red | Function button has been pressed for between 15 and 20 seconds. |
Glowing green | - | Function button has been pressed for longer than 20 seconds. |
