Product Description
The Sunny Tripower is a transformerless PV inverter, with 2 MPP trackers, that converts the direct current of the PV array to grid-compliant, three-phase current and feeds it into the utility grid.
Design of the Sunny Tripower
Position | Designation |
---|---|
A | Thread for screwing in two eye bolts for transport |
B | Type label The type label uniquely identifies the inverter. You will require the information on the type label to use the product safely and when seeking customer support from the SMA Service Line. You will find the following information on the type label:
|
C | Ventilation grid |
D | Recessed grip |
E | LEDs The LEDs indicate the operating state of the inverter ( > LED Signals). |
F | Display (optional) The display shows the current operating data and events or errors ( > Event Messages). |
G | Lower enclosure lid |
H | Upper enclosure lid |
I | DC Load-Break Switch The inverter is equipped with a DC load-break switch. If the DC load-break switch is set to the position I, it establishes a conductive connection between the PV array and the inverter. Setting the DC load-break switch to the O position interrupts the DC electric circuit and completely disconnects the PV array from the inverter. Disconnection takes place at all poles. |