Switching on the Battery

Requirements:

  • The battery modules must be correctly mounted.
  • All cables must be correctly connected.
  • The inverter must be compatible with the battery and equipped with a firmware version that satisfies at least the minimum requirements (see inverter technical information "Approved Batteries and Information on Battery Communication Connection").

    Procedure:

    1. Open the cover of the DC circuit breaker on the Battery Management System.
      2. 17243805068
    2. Switch on the DC circuit breaker.
    3. Close the cover of the DC circuit breaker on the Battery Management System.
    4. Commission the inverter (see product manual).
    5. The battery will be recognized automatically by the inverter. Check the configuration via the inverter user interface.

      Also see:

      Checking the Mounting and Connection Work
      Configuring the System with the SMA 360° App