Requirements for the installation site of the battery modules

The installation site must be suitable for the weight and dimensions of the product.

The surface at the installation site must be dry, horizontal and flat.

The installation site must not be exposed to direct solar irradiation. If the product is exposed to direct solar irradiation, the exterior plastic parts might age prematurely and overheating might occur. When becoming too hot, the product reduces its power output to avoid overheating.

The installation site must be protected against rain and snow (e.g. through the use of a roof).

There must be no heat sources in the immediate vicinity of the installation site.

All ambient conditions must be met.

The installation site must be less than 3000 m above mean sea level. If you would like to use the battery at altitudes above 3000 m, contact Service.

On flood plains, the installation site must be elevated and always protected from contact with water.