Additionally Required Materials and Equipment

Tape measure

For measuring the distances between bore holes for mounting

Marker pen

For marking the bore holes for mounting

Hammer drill with drill bit

For drilling the bore holes for mounting

Spirit level

For aligning the mounting bracket

Ring terminal lugs (M6x12)

For attaching to the grounding cables

Insulation stripping tool

For stripping the insulation off from the grounding cables

Crimping tool

For crimping the ring terminal lug on the grounding cable (10 mm²) and for assembling the DC cables.

Voltmeter/ multimeter

For verifying that no voltage is present

Torque screwdriver

For tightening bolted connections with the specified tightening torque.

Grounding cable

Necessary for the connection of the protective grounding (grounding conductor – PE).

Data cables

Necessary for data communication between the components.

DC cable

Necessary for the connection of the DC lines between the components.