Selecting the PV Inverter


You can install the following PV inverters in off-grid systems. The PV inverters must be equipped with the firmware version stated in the table or higher. If this is not the case, perform a firmware update (see PV inverter documentation).

PV inverter

from firmware version

Information

Sunny Boy (SB)

SB1.5-1VL-40 / SB2.0-1VL-40 / SB2.5-1VL-40

2.05.01.R

SB3.0-1AV-40 / SB3.6-1AV-40 / SB4.0-1AV-40 / SB5.0-1AV-40

1.2.18.R

SB3.0-1AV-41 / SB3.6-1AV-41 / SB4.0-1AV-41 / SB5.0-1AV-41 / SB6.0-1AV-41

1.2.18.R

SB 3000TL-20 / SB 4000TL-20 / SB 5000TL-20

2.51.02.R

SB 3000TL-21 / SB 3600TL-21 / SB 4000TL-21 / SB 5000TL-21 / SB 6000TL-21

2.60.03.R

Sunny Tripower (STP)

STP3.0-3AV-40 / STP4.0-3AV-40 / STP5.0-3AV-40 / STP6.0-3AV-40 / STP8.0-3AV-40 / STP10.0-3AV-40

2.13.07.R

1)

STP 8000TL-10 / 10000TL-10 / 12000TL-10 / 15000-TL-10 / 12000TL-10

2.22.17.R

1)

STP 5000TL-20/STP 6000TL-20/STP 7000TL-20/STP 8000TL-20/STP 9000TL-20/STP 10000TL-20/STP 12000TL-20

2.50.01.R

1)

STP 15000TL-30 / STP 20000TL-30 / STP 25000TL-30

2.83.03.R

1)

STP 50-40 / STP 50-41

1.1.19.R

1)

STP 12-50 / STP 15-50 / STP 20-50 / STP 25-50

1.10.12R

1)

Sunny Highpower (SHP)

SHP 100-20

3.10.04.R

1)

SHP 100-21

4.02.02.R

1)

1) Can only be used in three-phase off-grid systems

Maximum PV system power

In off-grid systems, the maximum PV system power depends on the total power of the Sunny Island inverters.

  • Maximum output power of the PV system per SI4.4M: 4600 W

  • Maximum output power of the PV system per SI6.0H: 9200 W

  • Maximum output power of the PV system per SI8.0H: 12000 W

The maximum output power of the PV system must be observed to ensure stable operation of the off-grid system.

Configuration of Stand-Alone Mode

All mentioned inverters can be configurated for the stand-alone mode. To do this, there must be selected a country data set valid for the stand-alone mode or a valid set country standard (see the PV inverter documentation).