Commissioning Procedure of System with the SMA 360° App

The entire system can be configured with the SMA 360° app following the connection of the individual components. SMA Solar Technology AG recommends using the SMA 360° app to configure the system.

Procedure

Connect and switch on all devices in the system (e.g. inverter, energy meter, battery).

In case of multiple SMA products, integrate these via the 360° app into the local network first.

Manual of the devices

( > Switching the Inverter On)

Carry out the configuration using the commissioning wizard of the SMA 360° app.

( > Configuring the System with the SMA 360° App)

Make further settings if necessary (e.g., configure multifunction relay, configure arc-fault circuit interrupter).

( > Use of the user interface powered by ennexOS)

    Also see:

    Commissioning
    Switching the Inverter On