Disassembling the Inverter
To decommission the inverter completely upon completion of its service life, proceed as described in this Section. If the inverter is defective and you have received a replacement device, observe the information on ( > Replacing the Product).
CAUTION
Risk of injury due to weight of product
Injuries may result if the product is lifted incorrectly or dropped while being transported or mounted.
- Transport and lift the product carefully. Take the weight of the product into account.
- Wear suitable personal protective equipment for all work on the product.
Procedure:
- If the protective cover for the connection area is still in place, reattach the protective cover to the inverter. Otherwise, protect the connection area with another sturdy cover.
- Unscrew the pan head screws M5x12 on the left and right used to secure the inverter to the mounting bracket (TX30).
- Lift the inverter up vertically off the mounting bracket.
- Unscrew the screws for fastening the mounting bracket and remove the wall mounting bracket.
- If the inverter is to be stored or shipped, pack the inverter, the AC connectors, the DC connectors, the antenna, the RJ45 protective sleeve, the battery connection cables, the connector for connecting the battery communication and the digital inputs and outputs, and the mounting bracket. Use the original packaging or packaging that is suitable for the weight and dimensions of the inverter. Dispose of the inverter.
- Dispose of the inverter in accordance with the locally applicable disposal regulations for electronic waste ( > Disposal).
Also see: