Requirements for the Battery Power Cables
Observe the following cable requirements:
- Conductor type: copper wire
- Conductor cross-section: 10 mm²
- Insulation stripping length: 6.5 mm
- Use the crimp contacts included in the scope of delivery.
- Maximum permissible cable length between the inverter and the battery: 10 m
- The cables must be rated for a minimum voltage of 800 V.
Observe manufacturer's specifications for battery power cables
When crimping battery power cables, the appropriate tool, correct cable cross-section, proper insulation stripping length, and a firm but non-damaging crimp are essential for a safe and conductive connection. Make sure not to damage the stranded wires and to insert and tighten all components correctly, especially the strain relief, to ensure a durable, moisture-proof, and abrasion-resistant connection.