Additionally Required Materials and Equipment

Screw (diameter: maximum 10 mm)

2

For attaching the wall mounting bracket

Washer (diameter: maximum 30 mm)

2

For attaching the wall mounting bracket

If necessary, screw anchors suitable for the support surface

2

For tightening the screws in the support surface

Eye bolt (size: M10)

2

For transporting the inverter using a crane

Screw (diameter: maximum 10 mm)

2

For protecting the inverter from being lifted

Washer (diameter: maximum 30 mm)

2

For protecting the inverter from being lifted

If necessary, screw anchors suitable for the support surface

2

For attaching the screws for anti-lifting lock in the support surface

Allen key (AF 3)

1

For opening and closing the lower enclosure lid and the DC protective cover and for mounting and disassembling the DC load-break switch

Allen key (AF 4)

1

For opening and closing the upper enclosure lid

Open-end wrench (AF 15)

1

For assembling the DC connectors

Screwdriver (blade width: 3.5 mm)

1

For removing the DC connectors

Measuring device

1

For verifying that no voltage is present