Event Messages
|
Message |
Cause |
|---|---|
|
Inst. code valid |
The entered Grid Guard code is valid. Protected parameters have now been unlocked and you can adjust the parameters. The parameters will be automatically locked again after ten feed-in hours. |
|
Self-test |
The self-test is in progress. |
|
Set parameter |
The parameter change has been adopted. |
|
Parameters set successfully |
The parameter changes were successfully adopted. |
|
Update file OK |
The update file found is valid. |
|
SD card is read |
Memory card is being searched for update file and the update file is being checked. |
|
No new update SDcard |
An update file that has already been used is on the memory card. |
|
Update communication |
The inverter is updating the communication component. |
|
Update main CPU |
The inverter is updating the inverter component. |
|
Update RS485i module |
The inverter is updating the corresponding component. |
|
Update Speedwire |
The inverter is updating the corresponding component. |
|
Webconnect update |
The inverter is updating the corresponding component. |
|
Upd. language table |
The inverter is updating the corresponding component. |
|
Update completed |
The inverter has successfully completed the update. |
|
Grid param. unchanged |
The selected rotary switch position is not assigned or the grid parameters cannot be changed. |
|
Grid param. locked |
The parameters are locked and you cannot change them. |