Intended Use

The Sunny Tripower is a transformerless PV inverter that converts the direct current from the PV array into grid-compliant three-phase current. The three-phase current must be connected to the utility grid with a suitable external transformer.

The product is suitable for indoor and outdoor use.

The product must only be operated with PV modules and cables that have been recommended and sold by the distributor. Do not connect any energy sources other than PV modules to the product.

PV modules with a high capacity to ground may only be used if their coupling capacity does not exceed 3.5 μF.

All components must remain within their permitted operating ranges at all times.

The product is exclusively approved for the Japanese market and must only be used in Japan.

Use this product only in accordance with the information provided in the enclosed documentation and with the locally applicable standards and directives. Any other application may cause personal injury or property damage.

Alterations to the product, e.g. changes or modifications, are only permitted with the express written permission of SMA Solar Technology AG. Unauthorized alterations will void guarantee and warranty claims and in most cases terminate the operating license. SMA Solar Technology AG shall not be held liable for any damage caused by such changes.

Any use of the product other than that described in the Intended Use section does not qualify as the intended use.

The enclosed documentation is an integral part of this product. Keep the documentation in a convenient place for future reference and observe all instructions contained therein.

The type label must remain permanently attached to the product.