Changing Device Parameters

You can use the system parameter assistant to change parameters of individual or several connected devices at the same time. You can also transfer parameters of a device to replaced devices or to devices added to the system. Changes made to individual device parameters can be viewed retrospectively.

Requirements:

  • All devices in the local network must be in operation and connected to the Sunny Portal via an Internet router.

  • The external parameterization must be in operation.

Changing the parameters of a device

  1. Log into Sunny Portal.
  2. Select the device whose parameters are to be changed.
  3. Select the menu Configuration.
  4. In the context menu, select [Parameters].
  5. Change parameters and confirm with [Save].
  6. It may take a while until the parameters are transferred to the device. You can view the details of your parameter changes in the Event monitor.

Changing parameters of several devices simultaneously

  1. Log into Sunny Portal.
  2. Select system.
  3. Select the menu Configuration.
  4. In the context menu, select [Device parameter adjustment].
  5. Click the button [System parameter assistant].
  6. The system setup assistant opens. After completing the system setup assistant, the status of the parameter changes can be viewed. You can view the details of your parameter changes in the Event monitor.

Transmitting parameters

  1. Log into Sunny Portal.
  2. Select the device whose parameters are to be transmitted.
  3. Select the menu Configuration.
  4. In the context menu, select [Parameters].
  5. Select the [Download] button and confirm with [Download now].
  6. A CSV file with all parameter settings is downloaded.
  7. Select system.
  8. Select the menu Configuration.
  9. In the context menu, select [Device parameter adjustment].
  10. Click the button [System parameter assistant].
  11. The system setup assistant opens.
  12. Click the [Import] button.
  13. Select the CSV file containing the parameter settings and confirm with [Upload]. Make sure that the formatting of the CSV file is not changed. Please note that texts must be edited with a text editor.
  14. After completing the system setup assistant, the status of the parameter changes can be viewed. You can view the details of your parameter changes in the Event monitor.

View parameter changes

  1. Log into Sunny Portal.
  2. Select the device from which the parameter changes are to be viewed.
  3. Select the menu Configuration.
  4. In the context menu, select [Parameters].
  5. To list parameter changes of the past chronologically, select the button.
    Managing System Sections
    Sensor Assignment