Adding Virtual Loads

A virtual load uses the energy and power values of an energy meter. For this purpose, an energy meter that has not yet been assigned must be assigned to the virtual load.

Requirements:

  • A measuring/switching device (e.g. radio-controlled socket) must be configured.

  • All devices in the local network must be in operation and connected to the Sunny Portal via an Internet router.

Procedure:

  1. Log into Sunny Portal.
  2. Select system.
  3. Select the menu Configuration.
  4. Select [Device management] in the context menu.
  5. In the energy meter row, click the button.
  6. Select [Configure as load].
  7. The system setup assistant opens.
  8. Follow the steps of the system setup assistant and confirm with [Save].
    Configuration of virtual generators
    Disabling devices